Raask Rear Sets

With my Café seat conversion my stock pegs, brake and shifter were in the wrong place so time to move them back using some rear sets from Raask.

The kit is complete but I did have to tweak it a little to suit my 6’2” frame/positioning.

Now for the shifter side...

I had help from the wife to lean the bike over to the brake side when I swapped the shifter lever out.

If you don’t do this you’ll find that the shifter lever hole is a direct link to the gearbox and a nice exit point for your gearbox oil.

I hope this write-up helps someone thinking of doing the same!